WitrynaTopcoat: Imron® 2.1+ or 3.5 + High production epoxy primer-sealer High Solids Low VOC Polyurethane Primer New High gloss polyurethane enamel Best Primer: Corlar® 2.1 PR-P™ (2-3) Topcoat: Imron® Industrial Strength (2-3) Or Imron® Industrial Strength Reduced Gloss Topcoat (2-3) or Imron® 2.1 HG™ + (1.5-2) or Imron® 3.5 HG™ + (2 … WitrynaIMRON 3.5 HG FORMERLY IMRON 333M, IS A HIGH GLOSS POLYURETHANE TOPCOAT Aircraft manufacturers Topcoat 2212290. Product Index Specification …
Couche de finition de polyuréthane ultra-lustrée Imron 3.5 HG ...
WitrynaImron 2.1HG-D + should be sprayed in medium to full wet coats to achieve proper build and allow flow-out. Spray technique is comparable to Imron 3.5 HG-D DTM. Airless and Air Assisted Airless Application WARNING - High Pressure Equipment. Read manufacturer’s instructions and safety warnings before operating equipment. WitrynaThe Axalta logo, Axalta™ , Axalta Coating Systems™ and all products denoted with ™ or ® are trademarks or registered trademarks of Axalta Coating Systems, LLC ... flutter network image scale
stanleymotorcarriage.com
WitrynaLa couche de finition Imron 3.5 HG + peut être appliquée sur d’autres revêtements Axalta, y compris sans toutefois s’y limiter, les apprêts de puissance industrielle Imron et autres apprêts Imron, les revêtements de copolymère de polyuréthane hydrodiluables Imron, les époxydes Corlarmd, les acryliques Tufcotemd et Witryna25 sty 2007 · In going to the Dupont web site, I found the Imron 3.5 HG product (Formerly 333M) that is intended for industrial use including marine. In looking at the data sheets it appears to be quite friendly for application on to other bases, brush or roller, wide temperature application and humidity range. Witryna3M flutter network image rounded corners